Pro-Ject MC Step Up Box S3

SOUND UPGRADE FOR YOUR MC CARTRIDGE

The output level of MC cartridges is very low, compared to a MM (Moving Magnet) one it is about 10x lower, which means, you need a special phono amplifier. A higher gain is needed to utilize the signals, which can result in a higher noise level and distortion. The MC Step Up Box S3 is the solution.

Lively, dynamic & natural

The MC Step Up Box S3 works very differently compared to a phono preamplifier. The windings ratio of the transformer determines the gain factor. As it works completely passive and no external power is needed, no extra power can be produced. The increase in voltage is achieved by a coresponding decrease is current. As there is no amplification, the MC Step Up Box S3 has a remarkable noise performance and a very low level of distortion. The sound with a Step-Up Transformer will be more lively, dynamic and natural.

Gold plated

Premium RCA terminals

Gold plated in- and output RCA terminals for optimum signal transmission.

Aluminium

Solid full aluminium housing

Due to the timeless design & rigid aluminium casework, the MC Step Up Box S3 is built for eternity.

Impedance

Cartridge impedance setting

Cartridge impedance matching button on the back. Two different settings available: 10-40? & 40-150?

Made in EU

High-quality materials

The new Step Up Box S3 is carefully designed and handmade in Europe.

• Frequency response 10Hz - 55kHz: +/- 1dB
• Gain at 10-40 Ohm: 21dB at 1kHz
• Gain at 40-150 Ohm: 24dB at 1kHz
• Recommended load: 47 kOhm / 100pF
• Input MC: 1x pair RCA phono sockets
• Output: 1x pair RCA phono sockets
• Dimensions WxHxD: 206 x 65 x 153 (164 with sockets) mm
• Weight: 940g