Pro-Ject MaiA DS3 integroitu vahvistin

Integroitu vahvistin, jossa mm. 9 sisääntuloa, DSD tuki, Bluetooth 5.0 HD, RIAA korjain MM ja MC äänirasioille

{Keywords}
Pro-Ject
Pro-Ject MaiA DS3 integroitu vahvistin MUSTA
  • Pro-Ject MaiA DS3 integroitu vahvistin MUSTA
  • Pro-Ject MaiA DS3 integroitu vahvistin HOPEA
  • Pro-Ject MaiA DS3 integroitu vahvistin
1 299,00 €
Yli 90 euron verkkokauppatilaukset toimituskuluitta kaikkialle Suomeen!
Huom! Ei koske ovelle-toimitusta.

Tuotetiedot

Uutuustuote

• Tehoa 80 / 140 wattia kanavaa kohden 8 /4 ohm 1% THD

• Dual mono -rakenne

• Sisäänrakennettu RIAA esivahvistin (Phono) levysoittimelle, MM ja MC -äänirasiavalinta

• Lisäksi 3 analogista ja 4 digitaalista sisääntuloa sekä Bluetooth 5.0 aptX HD

• USB Audio Class 2.0 tai suurempi, PCM Sample Rate aina 192 kHz/ 24 Bit

• DSD toisto (DSD64, DSD128; DSD256)

• Loistava PCM 1795DB 32 Bit/192 kHz Delta Sigma

• Viidennen sukupolven Bluetooth 5.0 aptX HD, erillinen antenni

• Äänenvoimakkuuden säätö moottoroidulla potentiometrillä

• Erillinen kuulokevahvistin, 430 mW / 32 ohm 1% THD

• Kiinteät ja säätyvä ulostulo subwooferille tai aktiivikaiuttimille

• IR kaukosäädin, Pro-Ject Control It

• Saatavana hopeisena tai mustana

MaiA DS3 on uuden sukupolven stereovahvistin loistavalla äänellä sekä tosi runsailla liitännöillä.

Tämä integroitu pienikokoinen vahvistin tarjoaa todella laadukkaan äänenlaadun ja äärimmäisen joustavat ja monipuoliset analogiset ja digitaaliset liitännät, mitä ikinä vaan voit toivoa!

Loistava putkivahvistin-tyyppinen soundi ja korkealuokkainen 32bit/192kHz D/A -muunnin on yhdistetty täydellisesti. Pienestä koostaan huolimatta voit liittää vahvistimeen yhdeksän eri laitetta.

MaiA DS3 on todella monipuolinen vahvistin.

OFTEN OVERLOOKED, BUT NEVER OVERHEARD

The MaiA DS3 (My audio integrated Amplifier) is our new reworked all-in-one compact amplifier solution. It combines both, analogue and digital inputs to suit all different sources. With its 140 watts per channel at 4 ohms you can easily power your favourite speakers. The whole electronics are packed into a beautiful machined full aluminium case which protects it against outer interferences.

Versatile input & output options

The MaiA DS3 offers nine inputs. Ready for digital or analog sources, wired or wireless – you’re covered. The phono section can handle MM, MI, or high output MC cartridges. Hook up your tuner or any other analog device to one of the three line-level RCA inputs. The DAC section allows a coax and two optical connections, as well as an USB input. The high definition aptX™ HD Bluetooth 5.0 wireless input allows streaming your favorite music via your phone. The variable RCA outputs also allow you to include a subwoofer or another power amplifier in your setup. Use the fixed output to distribute the audio signal to another device unaffected by the volume control to feed an audio recorder, for example.

Power output: 2x 80W/140W at 8 ohms/4 ohms (1%THD)

Frequency response (20Hz - 20kHz): <+/- 0,3dB at 20kHz

SNR: 97dB (105 dB - ‚A‘ weighted) at 1kHz

THD: < 0,01% at 10W / 8 ohms

Headphone amp output: 2x 430mW at 32 ohms (1%THD)

Line level inputs: 3 pair RCA (sensitivity: 860 mV)

Phono input: 1 pair RCA (for MM, MI and MC cartridges)

Phono input sensitivity: MM 47k ohms / MC 100 ohms

Phono input gain: MM 40dB / MC 60dB

USB input: USB Audio Class 2 (requires USB 2.0 or higher)

PCM sample rates: up to 192kHz / 24 bit

DSD support: DSD64 , DSD128, DSD256

BT version & codec: BT 5.0; aptX, aptX HD, A2DP profile

Trigger In/Out: 12V on/off detector

Outboard power supply: 36V/5,5A DC

Standby Power consumption: < 0,5 watts

Dimensions WxHxD: 206 x 71 x 240 (252 with sockets) mm

Weight: 1850g without power supply