McIntosh C49 etuvahvistin

C49 on McIntoshin uusi etuvahvistin, jossa perinteiset, monipuoliset analogiset tuloliitännät saivat seurakseen päivitettävän DA1-modulin, joka tuo myös digitaaliset tulot laadukkaan DA-muuntimen pureskeltavaksi. Quad Balanced-kytketty 32-bittinen muunnin. Muunnokset aina DSD256 & DXD384-tasolle asti.

Elävää, luonnollista ääntä päätevahvistimelle tai aktiivikaiuttimille. Rakenne ja viimeistely McIntoshin tapaan vakuuttava.

Kaksi balansoitua ja kolme RCA-tuloa. Laadukas levysoitinesivahvistin MM- ja MC-tuloliitännöillä. Säädöt mm. MC-impedanssille. Home theater pass through-kotiteatteriliitäntä.

DA1-moduli päivitettävissä myöhemmin DA2-moduliin. Roon-yhteensopiva.

Tyylikäs ja ergonominen kauko-ohjain vakiovaruste.

The C49 comes with a multitude of inputs. For analog, it has 2 balanced and 3 unbalanced, along with 2 phono inputs (comprised of 1 Moving Coil and 1 Moving Magnet) for connecting turntables. On the digital side, it has 6 inputs housed in the DA1 module. The inputs are: 2 coaxial, 2 optical, 1 USB and 1 proprietary MCT (for use with our MCT series of SACD/CD Transports). The DA1 is powered by an 8-channel, 32-bit Digital-to-Analog Converter (DAC) that is used in Quad Balanced mode; it supports up to DSD256 and DXD 384kHz for playback of high resolution audio. In total, the C49 has 13 inputs, and each can be given user-friendly names to simplify system setup and control.

ELECTRONIC SPECIFICATIONS:

Number of Channels: 2

Total Harmonic Distortion: 0.005%

Frequency Response: +0, -0.5dB from 20Hz to 20kHz / +0, -3dB from 15Hz to 100kHz

Maximum Volts Out (Balanced / Unbalanced): 16V RMS / 8V RMS

Sensitivity High Level (Balanced / Unbalanced): 900mV / 450mV

Sensitivity Phono (Moving Coil): 0.45mV

Sensitivity Phono (Moving Magnet): 4.5mV

Signal To Noise Ratio (High Level): 100dB

Signal To Noise Ratio (Moving Coil): 80dB

Signal To Noise Ratio (Moving Magnet): 82dB

Voltage Gain (High Level): 15dB

Voltage Gain (Moving Coil): 60dB

Voltage Gain (Moving Magnet): 40dB

Input Impedance (Balanced / Unbalanced): 44K ohm, 22K ohm

CONNECTIVITY:

Balanced Input: 2

Unbalanced Input: 3

Phono Input Moving Coil: 1 (adjustable)

Phono Input Moving Magnet: 1 (adjustable)

Upgradeable Digital Audio Module: Yes: DA1

Digital Coaxial Input: 2

Digital Optical Input: 2

Digital MCT (DIN) Input: 1

Digital USB Input: 1

HDMI (ARC) Input: 0

Digital AES/EBU Input: 0

Balanced Fixed Output: 0

Balanced Variable Output: 2

Unbalanced Fixed Output: 1

Unbalanced Variable Output: 2

Headphone Output: 1/4″ High Drive with Headphone Crossfeed Director (HXD®)

Input Level Match: Yes, +/- 6dB

Home Theater PassThru: Yes

Unbalanced Analog Connector Type: Standard

Service Port: 1

CONTROL:

Tone Controls: Bass and Treble

Tone Bypass and Input Assign: Yes

RS232 Control Input: Yes

Power Control Output: 1 Main, 2 Trigger

Rear Panel Data Port: 4

Rear Panel IR Sensor Input: Yes

GENERAL SPECIFICATIONS:

Multi-Chassis or Single: Single, two layer

Output Meters: No

Vacuum Tube or Solid State: Solid State

Power Consumption (On): 30 Watts

WEIGHTS & DIMENSIONS:

Dimensions (W x H x D): 44.45cm x 15.2cm x 45.72cm

Weight: 10.4 kg

Shipping Weight: 17 kg