Pro-Ject 6 Perspex SB levysoitin Quintet Blue rasialla

Päivitetty versio EISA -voittaja levyssoittimesta.

EVO 9CC hiilikuituäänivarsi, sähköinen nopeudenvaihto, kelluva rakenne ja huippuäänirasia Ortofon MC Quintet Blue.

{Keywords}
Pro-Ject
Pro-Ject 6 Perspex SB levysoitin Quintet Blue rasialla
  • Pro-Ject 6 Perspex SB levysoitin Quintet Blue rasialla
  • Pro-Ject 6 Perspex SB levysoitin Quintet Blue rasialla
  • Pro-Ject 6 Perspex SB levysoitin Quintet Blue rasialla
1 999,00 €
Yli 90 euron verkkokauppatilaukset toimituskuluitta kaikkialle Suomeen!
Huom! Ei koske ovelle-toimitusta.

Tuotetiedot

The ultimate sub-chassis turntable for the 21st century

The transparent acrylic plinth stands on three individually height-adjustable TPE-damped aluminium cones and carries the motor and the sub-chassis. The sub-chassis, made of Corian, rests on three magnetic fields. A magnetic subchassis suspension system avoids parasitic noise normally caused by conventional spring mechanism. A supplied spirit level allows easy adjustment of the sub-chassis. A quiet running AC motor unit drives the platter's outside edge via a belt. It does incorporate an advanced DC-driven motor control, that ensures perfect speed stability and electronic speed change.

The resonance-optimised platter is a sandwich construction utilising a fine-balanced medium density fibre platter and a 4mm thick flat-ground layer of vinyl and a screw-down metal record clamp. It runs on an inverted bearing with stainless-steel axle carrying a ceramic ball/plate bearing. The headshell and armtube of high-end tonearm 9cc Evolution are fashioned from a single piece of carbon-fibre. A conical armtube avoids standing wave reflections. Inverted tonearm bearing comprises four hardened stainless tips in ABEC 7 spec ballraces. Supplied counterweights are suitable for cartridges weighing between 5 - 7,5g / 7 - 10g / 9 - 11g or 10 - 14g.

A top-grade connection cable `Pro-Ject Connect it E with RCA connectors is supplied (123cm). A dust cover is included.

OMINAISUUDET:

• Acrylic Plinth

• Sub-chassis made from Corian with magnetic suspension

• Acoustically inert sandwich construction of platter with combination of MDF and vinyl layer as mat

• Inverted main bearing with ceramic ball/plate

• Belt drive with AC motor with DC driven AC generator

• Electronic speed control with 33/45 rpm switching

• Pre-mounted 9" tonearm 9 cc Evolution

• Tonearm bearings with ABEC 7 ballraces

• 5P Connect it Phono CC cable with RCA plugs

• Dustcover included

Tehdasasennettu äänirasia: Ortofon MC Quintet Blue

Nominal Speeds:33/45 RPM (electonic speed change)
Dust Cover:Yes
Magnet Supported Sub-Chassis:Yes
Record Clamp:Yes
RCA Phono Sockets:Yes
Aluminium Cones:Yes, Sorbothane-Damped
Tonearm:Pro-Ject 9CC Evolution
Carbon Fibre Headshell & Arm Tube:Yes
Effective Tonearm Length:9 " (230mm)
Effective Tonearm Mass:8 g
Overhang:18 mm
Supplied Counterweights:

For Cartridges Weighing...
5-7g, 7-10g, 9-11g & 10-14g
Downforce Range:10 - 35mN
Speed Variance:33 rpm ± 0.1 %, 45 rpm ±0.06 %
Wow & Flutter:± 0.1%
Signal to Noise:-73dB
Platter Weight / Diameter:2 kg / 300mm
Power Supply Type:

Mains-Fed Outboard PSU
220 - 240V, 50Hz
Outboard Voltage:15V DC / 800mA
Power Consumption:2W
Dimensions (W x H x D):460 x 420 x 465mm
(Lid Open)
460 x 160 x 365mm
(Lid Closed)
Weight:11 kg