Audiotechnica äänirasia AT-VM95E

Audio Technica AT-VM95E äänirasia

{Keywords}
Audiotechnica
Audiotechnica äänirasia AT-VM95E
  • Audiotechnica äänirasia AT-VM95E
  • Audiotechnica äänirasia AT-VM95E
50,00 €
Yli 90 euron verkkokauppatilaukset toimituskuluitta kaikkialle Suomeen!
Huom! Ei koske ovelle-toimitusta.

Tuotetiedot

Audio Technica AT-VM95E with 0.3 x 0.7 mil elliptical stylus fits half-inch mount turntables. The cartridge’s special coil design delivers a powerful output level of 4.0 mV. It also offers excellent channel separation and low distortion for outstanding tonal quality. The durable, low-resonance housing includes threaded inserts that enable the cartridge to be mounted to the headshell with just two screws – no nuts required. And since all VM95 Series share the same body, the stylus can be replaced with any of the six interchangeable AT-VMN95 replacement styli.

Features

  • VM95 Series dual magnet cartridge with 0.3 x 0.7 mil elliptical stylus
  • Aluminum cantilever
  • Specially wound coils increase output voltage
  • Durable low-resonance polymer housing
  • Threaded inserts in cartridge body enable cartridge to be mounted to headshell with just two screws – no nuts required
  • Compatible with any AT-VMN95 replacement stylus


Specifications

  • Frequency Response: 20-22,000 Hz
  • Channel Separation: 20 (dB at 1 kHz)
  • Vertical Tracking Force: 1.8-2.2 g (2.0 g standard)
  • Stylus Construction: Bonded round shank
  • Recommended Load Impedance: 47,000 ohms
  • Output: 4.0 mV (1 kHz, 5 cm/sec.)
  • Channel Balance: 2.0 dB (1 kHz)
  • Stylus Shape: 0.3 x 0.7 mil elliptical
  • Cantilever: Aluminum pipe
  • Mount: Half-inch
  • Replacement Stylus: AT-VMN95E
  • Coil Impedance: 3.3 k ohms (1 kHz)
  • DC Resistance: 485 ohms
  • Load Capacitance: 100 to 200 pF
  • Coil Inductance: 550 mH (1 kHz)
  • Vertical Tracking Angle: 23°
  • Dimensions (H x W x D): 17.2 × 18.9 × 28.3 mm
  • Weight: 6.1 g

Accessories Included: Two 11 mm installation screws, two 8 mm installation screws, two washers