Lyngdorf FR-1 seinäkaiutin

Lyngdorfin erittäin suorituskykyinen seinäkaiutin FR-1. Toimii hienosti ilman erillistä subwooferiakin.

Lyngdorf FR-1 seinäkaiutin
  • Lyngdorf FR-1 seinäkaiutin
  • Lyngdorf FR-1 seinäkaiutin
  • Lyngdorf FR-1 seinäkaiutin
999,00 €
Yli 90 euron verkkokauppatilaukset toimituskuluitta kaikkialle Suomeen!
Huom! Ei koske ovelle-toimitusta.


Melko suurikokoinen, mutta todella hyvin soiva seinäkaiutin FR-1 on saatavana kappaleittain ja mustana tai valkoisena.

Paketissa mukana seinäkiinnike sekä ritilä. (Mustassa musta ja valkoisessa kaiuttimessa valkoinen)

Kpl hinta 799€


This two-way, full range loudspeaker brings our compact speaker designs to a new level of performance with the genuine musicality characterizing Lyngdorf Audio. Our focus on dynamic performance resulted in a closed cabinet design with a large slave unit, which suppress the internal resonance frequency and allows for deep bass from this elegant shallow cabinet.

Designed for wall mounting, the FR-1 is compact and solid, emphasizing our focus on dynamic music reproduction without sacrificing natural timbre. The depth of the cabinet is reduced to a minimum to ensure discreet placement and to keep the drivers as close to the wall as possible for optimal coupling to the room.


With a new powerful 6.5″ driver and the added output from the slave unit, the FR-1 does not need the support of a subwoofer. The  driver is designed with a strong magnet and, together with the supporting 8″ slave unit, the low-frequency performance is unequalled in such a small cabinet. Voices are exceptionally open, and transients are tight and clean, which makes the FR-1 the optimal choice for an elegant home media installation.

If you want to enhance the performance further, the perfect match is a set of Lyngdorf BW-2 woofers. Thereby you can get even deeper bass and higher overall output.


The speaker cones are made from aluminum, which is light and stiff and designed with a single well-defined breakup point that is easy to counteract in the internal filters. The textile soft dome design tweeter from the Lyngdorf MH-2 is redesigned to match the higher output, and the result is convincing with high sensitivity and an impressive soundstage.


With its clear and unstressed sound, the FR-1 calls for playing loud and all night. Not only is the tweeter protected by a PTC circuit, but the entire speaker is designed for high performance.

The temperature-resistant voice coil made from glass fibre and impregnated with a polyimide resin, together with a ventilated magnet and a copper cap, all minimize temperature build-up and distortion.


Description: 2-way speaker with slave unit
Power handling: 100 W
Nominal impedance: 4 Ohm
Tweeter: Size 1″, textile soft dome, PTC protection
Midrange driver: Size 6.5″, 35 mm voice coil, cone material: aluminum, die cast basket, vented magnet
Slave unit: Size 8″
Enclosure: Ported with slave, full MDF construction, volume: 13.5 liters
Frequency response: 50 to 20.000 Hz (-3dB)
Maximum SPL: 101 dB RMS full range, pink noise, 107 dB Peak
Sensitivity: 89 dB (2.87V/1m)
Crossover point: 2.2 kHz
Connections: Binding posts
Placement options: Wall mount included, prepared for alternative brackets (M4 bushings)
Dimensions (W x H x D): 34.0 x 57.0 x 11.5 cm 
Weight: 8.4 kg 
Finish: High gloss black or matte white