Pro-Ject PreBox DS2 Analogue
Audiofiili etuvahvistin viidellä analogisella sisäänmenolla
Huom! Ei koske ovelle-toimitusta.
Tuotetiedot
Erinomainen, pienikokoinen etuvahvistin
• Analogisia sisäänemnoja 5 paria
• Äänenvoimakkuuden kanssa säätyvä sekä kiinteä RCA-linja ulostulo (Fixed line level output as well as variable output )
• Mono subwoofer RCA ulostulo
• Trigger sisään/ulos
• RCA Line Level solid state output
• Ultra linear circuit
• Coupling-capacitor free signal path
• Ultra low noise floor
• Alu/metallinen kotelo, saatavana hopeisena tai mustana
• Erikoistilauksesta mustat tai pähkinän väriset puiset sinupaneelit (+100€)
• IR kaukosäädin
Pre Box DS2 analogue - simple, elegant and highly audiophile!
The heart of the Pre Box DS2 analogue is a pure single-ended Class-A output, an absolute High End solution. A new circuit design and a newly developed relais controled volume are responsible for the extremely low noise floor of Pre Box DS2 analogue. The inputs are also switched lossless via relais. Because of couple-capacitor-free signal paths the signal is as clean as it gets. An effort this high can not be found in any other preamplifier in this pricerange. The solid casing, an aluminium-metal sandwich construction, protects against vibrations and electromagnetic interferences. The result is an unbelievable dynamic and relaxed musical sound. In combinati-on with Amp Box DS2 or two Amp Box DS2 Mono‘s you will reach new summits without breaking the bank. The 12V trigger function switches other components (poweramplifiers, etc.) with Pre Box DS2 analogue on and off.
The Pre Box DS2 analogue is a superdynamic High End soundjewel for a tiny price.
<td <thd<="" td="">
Technical data | Pro-Ject Pre Box DS2 analogue |
5 analogue Inputs | 5x Line In (RCA) |
3 analogue Outputs | 1x Fix Line Out (RCA), 1x Variabler Line Out (RCA), 1x Sub out (mono) |
Frequency response | 20Hz - 20kHz (-0,3dB) |
Output voltage | 1 V bei 1 kHz |
Noise floor | -90dB (A-weighted) |
SNR | 113dB (20 - 20.000 kHz) |
Input impedance | 10kOhm |
Trigger | 12V DC |
Trigger in-/output | 2-pol 2.5mm co-axial jack |
Power consumption | 120mA DC |
Power supply | 18V/1000mA DC (included) |
Dimensions B x H x T | 206 x 72 x 200mm |
240 x 72 x 200mm | |
Weight | 1500g (Alu) without powersupply |
1780g (Wood) without powersupply |