iFi Nano iDSD BL
Tehokas, pieni ja kevyt, akkukäyttöinen kuuloke-esivahvistin/USB-DAC iFi:ltä. Jäljellä 2 kpl
Huom! Ei koske ovelle-toimitusta.
Tuotetiedot
iFi Nano iDSD Black Label toistaa KAIKKI korkearesoluutioiset formaatit: PCM/DSD/DXD/MQA.
True Native® teknologian avulla musiikkiformaatit pysyy täysin sellaisena kuin on tarkoitettukin. PCM (32bit/384kHz), DSD (6.2MHz) ja DXD (384kHz)
USB-sisäänmenoon voi liittää tietokoneen tai *iPhone/iPad/Android-laitteen.
The nano iDSD Black Label plays Hi-Res audio up to DSD256
so you can enjoy your tunes in the original format just as the artists intended.
Getting into MQA? The nano BL is MQA ready. Use it with Tidal Masters on your computer or mobile.
The nano iDSD Black Label is small but mighty with 10x more amplification power than an iPhone.
It can drive most headphones and has our iEMatch technology built-in, so it can work with In-Ear-Monitors (IEMs).
The in-built iFi iPurifier means it delivers clean, quality music with no buzz, no hiss and no fuss!
General | |
Input(rear): | USB2.0 type A ‘OTG’ Socket (with iPurifier® technology built-in) |
Output(rear); | 1 x audio fixed line out L+R 3.5mm |
Digital Filter: | 2 positions. 2 filters |
Outputs(front): | 2 x 3.5mm headphone audio outputs. ‘Direct’ and ‘iEMatch®’ |
DAC | |
DAC: | DSD, DXD, PCM DAC by Burr Brown Bit-Perfect DSD processing, Bit-Perfect DXD processing |
Clock: | Low-jitter crystal clock |
Audio Formats: | DSD 256/128/64/12.4/11.2/6.2/5.6/3.1/2.8 |
DXD 384/352.8kHz | |
PCM 384/352.8/192/176.4/96/88.2/48/44.1kHz | |
MQA 88.2/96/176.4/192kHz filters | |
Filter–PCM: | Listen (transient optimised minimum phase) |
Measure (frequency response optmised) | |
–DSD: | Listen (extended bandwidth transient optimised) |
Measure (narrow bandwidth, low output band noise optimised) | |
–DXD: | Fixed Bit-Perfect Processing |
–MQA: | Fixed MQA Filter |
Headphone Amplifier | |
Amplifier: | Dual Mono 2 x 285mW Direct Drive, coupling capacitor free circuit for highest fidelity |
Volume Control: | 3.5mm TRRS with Balanced compatible wiring |
Dynamic Range(including DAC): | > 109dB(A) @ 3v (Direct) |
> 107dB(A) @ 0.5V (iEMatch®) | |
THD &N (@ 125mW/30R): | < 0.005% |
Max. Output (<10% THD): | > 3.5V @ 600Ω Load (Direct) (20mW/600Ω) |
> 2.9V @ 30Ω Load (Direct) (285mW/30Ω) | |
> 1.7V @ 15Ω Load (Direct) (200mW/15Ω) | |
Output Impedance : | < = 1Ω (Direct) |
< = 4Ω (iEMatchsup>®) | |
Channel Separation: | > 79dB @ 600Ω Load (Direct) |
> 79dB @ 15Ω Load (Direct) (1kHz, TRRS plug Balanced wiring) | |
Line Output | |
Dynamic Range(Line): | > 109dB(A) |
THD & N(0dBFS Line): | < 0.004% |
Output Voltage(Line): : | 2.15V (+/-0.05V) |
Output Impedance: | < 240Ω |
Channel Separation: | > 99dB (@ 1kHz) |
Dimensions: | 96(l) x 64(w) x 25.5(h)mm |
Weight: | 139g |